Your Cart

Standard Room Coolers

Standard Room Coolers
Standard Room Coolers
Ex Tax: 0.00TL
  • Stok: Stokta Var
  • Marka: Friterm
  • Model: Standart Oda Soğutucular
New Water Drainage System
Thanks to the inclined water drainage pan, the drainage water is drained quickly and easily. (For fan diameter ≥ 400 mm)

Hinged, Retractable Side Cover and Drain Pan
Thanks to its hinged structure, the side covers and the drain pan can be opened and closed easily, providing easy service.

Exploded Outlet Chambers in Different Directions for Collector / Distributor Outputs
Developed for collector/distributor outlets, blasted outlets in different directions and outlet connections can be made optionally from the lower or upper part.

Double Walled Pan & Air Insulation
Thanks to the double-walled pan, condensation is prevented under the pan.

New Bottom Leg Designs & Support Feet
With the new lower legs and carrier legs, the products are safely shipped without any damage. Since it is shipped with the pan at the bottom, it is assembled without the need for reverse freezing. (There is no carrier foot for O300- 350 mm.)

Advanced Pipe and Fin Structure for High Thermal Efficiency
Internally grooved special pipes are used in order to improve the heat transfer in the Two-Phase flow of the Refrigerant. High performance is provided with improved heat transfer thanks to the special wing structure on the air side.

• FES model chillers are designed for commercial/industrial cold and frozen storage rooms, rapid cooling and shock rooms with small, medium and large cooling capacity.
• Friterm FES series are ceiling mounted evaporators that blow in one direction, work on suction as standard.
• When the products with 3-phase fan are operated at double speed, they initially provide rapid cooling and then prevent moisture loss from the product with low air circulation.
• Friterm FES series consists of 606 models in the range of 0.8 kW -204 kW with rich accessory options.
• Suitable for working with R404A, R507, R134A, ... refrigerants.
• Capacities are given for R404A.

Battery Features
• Straight pipe arrangement that reduces defrost time and defrost energy consumption,
• 4- 7- 10-12 mm lamella spacing,
• Special grooved copper pipe for evaporators, aluminum lamella,
• Copper pipe inlet-outlet connections,
• Connections are located on the right side of the air flow direction as standard,
• Refrigerant distributor
• Optimum circuitry,
• Test Pressure: 34 bar (PED 2014/68/EU)
• Maximum operating pressure: 22 bar

• Casing from AlMg3 or galvanized steel material depending on the model and size,
• Smooth, permanent, corrosion-resistant decorative structure with electrostatic powder painted (RAL 9016),
• Hinged easy-to-open side doors and bottom pan.
• Foot structure that facilitates the transportation and assembly of the product (except for products with Ø300- 350 mm fan)

Drain Pan
• Removable pan in models with Ø630- 800 mm fan
• Hinged pan in models with Ø300- 350- 400- 450- 500 mm fan
• Double-walled, special pan structure that prevents condensation on the outer wall

• High efficiency axial type Ziehl Abegg, EBM or equivalent fans with 300-350-400-450-500-630-800 mm diameters are used in FES model coolers.
• Motor protection class IP 54 for Ø800-630- 500- 450 mm fans; IP 44 for Ø400- 350- 300 mm fans; The insulation class is B and F.
• The lowest operating temperatures are -25°C for single-phase fans and -40°C for three-phase fans.
• Special fans should be used in operating conditions below -40°C.
• Fans work in the suction direction as standard.
• 300/350/400/450 mm fans as standard 230V 1~50/ 60 Hz; 500/630/800 mm fans 400V 3~50Hz,
• Three phase fans are double speed as standard.
• Thermistor connections must be made in fans with thermistors used for motor protection.
• Friterm has the right to use different brands of fans. Depending on this situation, there may be partial differences in fan information.

• Sound pressure levels of the products are given in the catalog in accordance with EN 13487 standard.
• While calculating the sound levels, the sound power levels (LwA) given by the fan manufacturers are used.
• Consult an expert for the situations where sound levels are critical.

• Electric heater in the battery
• Electric heater in the pan
• Moving the fan connections to the terminal box
• Wall hanging apparatus
• Fan Heater
• Drain heater
• Air flow diverter
• Textile duct connection
• Textile defrost bag, defrost cover
• Repair switches for fans

• Air defrost
• Wet defrost (for products with Ø400- 450- 500- 630- 800 mm fan)
• Hot gas defrost (battery and pan)
• Hot glycol defrost
• Coated lamellas
• Coated battery
• AISI 304 or AISI 316 stainless steel cassette
• Speed control units
• Different lamella spacing options
• 60 Hz motor
• EC fan
• Stainless steel tube (AISI 304, AISI 316)
• Insulated drain pan
• Hot fan hood
• Fan configuration trying to push
• Expansion valve assembly
• High power fans